Separate Sides Settings - Sony MVS-8000 User Manual

3
Set the following parameters.
Knob
1
2
3
Selecting the signal to insert in the background
When using the MVE-9000, you can select the signal to insert in the
background.
With [Bkgd] set on, use the following procedure.
1
In the <Bkgd Fill> group, select one of the following.
Flat Color: single color
Mix Color: mix color signal set in the Color Mix menu (see page 56)
Ext Video: an external video signal input to the Ext IN connector
Notes
• "Mix Color"or "Ext Video" can only be applied to one of the
background, flex shadow (see page 44), trail (see page 115), and wind
(see page 123) effects.
If you select "Mix Color" or "Ext Video" in one of these settings, a
selection of "Mix Color" or "Ext Video" in any of the other effects is
disabled, and "Flat Color" is selected in its place.
• When executing combining four channels of DME images, "Mix Color"
and "Ext Video" cannot be selected.
2
Only if Flat Color is selected in step 1, adjust the following parameters.
Knob
1
2
3

Separate Sides Settings

This effect applies separate video signals and key signals to the front and back
of the image.
For an illustration of the concept of front and back, see "DME Special Effects"
in Chapter 1 (Volume 1).
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
0.00 to 100.00
359.99 to 0.00
DME Special Effect Operations
137