Sony MVS-8000 User Manual page 175

7
8
174
Control of VTRs, Extended VTRs, and Disk Recorders
The first button pressed lights green to indicate the reference region, and
the subsequent buttons light amber.
Set the start point.
• Using the [START TC] button:
Play the VTR, Extended VTR or disk recorder by control from the device
control block. Find the desired start point, and press the [START TC]
button at that position.
If using the [START TC] button, each time you press the button the start
point timecode is overwritten.
• Using the [SET START TC] button of the device control block (search
dial):
Press the [SET START TC] button in the device control block (search
dial). The display in the numeric keypad control block shows "START
TC". Enter the desired timecode from the numeric keypad control block,
and press [ENTER].
For details of timecode entry, see "Setting the start point and stop point
with the [SET XX] buttons" (page 176).
• Setting with the Cueup & Play menu:
For details of settings in the Cueup & Play menu, see "Setting the start
point, stop point, and start delay time in a menu" (page 177).
Set the stop point or duration.
When two of the start point, stop point and duration are set, the remaining
one is automatically determined. For example, if you set the stop point in
the following procedure, you do not need to enter the value of the duration.
• Using the [STOP TC] button:
Play the VTR, Extended VTR or disk recorder by control from the device
control block. Find the desired stop point, and press the [STOP TC] button
at that point.
If using the [STOP TC] button, each time you press the button the stop
point timecode is overwritten.
• Using the [SET STOP TC] button of the device control block (search
dial):
Press the [SET STOP TC] button in the device control block (search dial).
The display in the numeric keypad control block shows "STOP TC." Enter
the desired timecode from the numeric keypad control block, and press
[ENTER].
• Using the [SET DUR] button of the device control block (search dial):