Sony MVS-8000 User Manual page 338

With ccp-8000 series center control panel
Hide thumbs Also See for MVS-8000:
Table of Contents

Advertisement

The left side of the status area shows data for the main base (physical
layout and switcher bank names and key assignment). The right side shows
the data for the extension section (physical ports and key assignment).
2
Press directly on the display on the left, to select the control block for the
assignment.
Here, press on the intersection of the "2nd Row" column and "Module
Assign" row.
3
In the <Module Assign> group, select the key you want to assign.
In this example, select [Key3,4].
To return the key assignment to the default
In the Compact Key Module Assign menu, press [Default].
This returns all key assignments to their factory default state.
Assigning preview output to preview selection buttons
It is possible to assign any preview output to a preview selection button.
This applies to the preview selection buttons in the fade-to-black control block
and the downstream key/fade-to-black control block.
For details of these control blocks, see Chapter 2 (Volume 1).
1
In the Panel >Config menu, press [Link/Program Button].
The Link/Program Button menu appears.
2
Press [Fade To Black Module].
The Fade To Black Module menu appears.
On the left of the status area, preview selection buttons (1 to 11) appear.
On the right side a list of signals to be assigned appears.
3
In the button indications on the left, press the button for the assignment.
4
Using any of the following methods, select the signal to be assigned.
• Press directly on the list on the right.
• In the list on the right, press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob
1
Parameter
Adjustment
Button
Button selection
Setup Relating to Operations From the Control Panel
Setting values
1 to 20
337

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvs-8000sf

Table of Contents