Sony MVS-8000 User Manual page 302

Knob
3
5
Press [Set].
The selection is reflected under "Install" and "Title" in the upper list.
6
Press [Install].
The "Install" box shows "On," confirming that this is to be installed. To
cancel this installation setting, press "Install" once more, making the box
blank.
7
Repeat steps 3 to 6, to confirm all software to be installed.
8
Press [Execute].
A confirmation message appears.
9
Press [Yes].
This carries out the installation, and when it completes normally, the
"Install" box shows "OK."
Displaying installation details
In the System >Install/Unit Config menu, press [Detail Information].
This accesses the Detail Information menu, and displays the detailed
information on the software and firmware installed in the currently selected
device.
Making settings required to use the software
BZS-8250
BZDM-9050
BZS-8050
BZS-8200
BZS-8420
BZS-8500M
BZS-8510M
BZS-8520M
BZS-8530M
BZS-8560
Parameter Adjustment
No Software selection
Simple P/P Software
Texture Lighting Software (for MVE-9000)
Editing Control Software
Multi Program 2 Software
Color Corrector Software
Switcher Upgrade Software
Switcher Upgrade Software
Mix/Effect Upgrade Software
Mix/Effect Upgrade Software
Switcher Upgrade Software
Setting values
1 and upwards
a)
d)
b)
c)
d)
b)
b)
Setup for the Whole System
301