Signal Input Settings (Input Menu) - Sony MVS-8000 User Manual

1
2
To display the menu for enabling/disabling the side flags
In the Switcher >Config >Side Flags menu, press [Misc >Enbl >Setup Flags].
To display the menu for assigning the side flags on/off function to
a cross-point button
In the Switcher >Config >Side Flags menu, press [Side Flags Button Assign].

Signal Input Settings (Input Menu)

For setup relating to signal inputs, use the Switcher >Input menu.
To display the Input menu
In the Engineering Setup menu, select VF3 'Switcher' and HF2 'Input.'
The status area shows source numbers and source names, input signal phase,
and through mode on/off setting.
Making phase adjustment and through mode settings
1
2
3
390
Setup Relating to Switcher Processor
In the Switcher >Config >Side Flags menu, press [Width].
Adjust the following parameters.
Knob Parameter Adjustment
3 Left Width of left side flag
4 Right Width of right side flag
5 All Width of both side flags
In the Switcher >Input menu, select the input signal to which the settings
apply.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Src No Input signal selection
The selected input signal appears in reverse video.
Press [Input Phase Adj].
To adjust the phase, adjust the following parameter.
Setting values
–100.00 to +100.00
–100.00 to +100.00
Left value shown
Setting values
1 to 80