Character Trail Settings - Sony MVS-8000 User Manual

Knob
1
a) 1 (SINE): Sine wave
2 (PARABOLA): Parabola wave
3 (TRIANGLE): Triangular wave
4 (RECTANGLE): Rectangular wave
5 (CIRCLE): Circular wave
6 (CUBIC): Cubic wave
7 (MELT1): Melting wave 1
8 (MELT2): Melting wave 2
To make the melting part stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
Knob
1
2

Character Trail settings

The Character Trail effect extends the edge of the image like a trail.
To apply the Character Trail effect
With the Character Trail menu displayed, set the following parameters.
Knob
1
2
3
4
a) Setting for SD 4:3, SD 16:9
b) Setting for HD 4:3, HD 16:9
To make the tip of the swirl stardust
1
Press [Pixel], turning it on.
2
Set the following parameters.
Parameter Adjustment
Form Waveform
Parameter Adjustment
Density Degree to which image
disappears
Random Degree to which pixel positions
become more randomized
further from the center
Parameter Adjustment
Transition Position where effect starts
Expand Degree of expansion
Trans Angle Angle of slanting in effect region
Trail Angle Direction of trail
Setting values
a)
1 to 8
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
a)
–8.000 to +8.000
b)
–32.000 to +32.000
0.00 to 100.00
–8.000 to +8.000
–100.00 to +100.00
DME Special Effect Operations
109