Sony MVS-8000 User Manual page 329

Selecting the module to be the reference for device control block
In the <Reference Module> group of the Panel >Config menu, select the
module to be the reference.
• Trackball
• Joystick
Assigning a region to a region selection button in the numeric
keypad control block
A maximum of four regions can be set for a single region selection button in
the numeric keypad control block.
1
2
3
328
Setup Relating to Operations From the Control Panel
In the Panel >Config menu, press [10 Key Region Assign].
The 10 Key Region Assign menu appears.
The left side of the status area shows region selection buttons; the upper
part of the right side shows a list of regions assigned to region selection
buttons, and the lower part shows a list of assignable regions.
Press the indication of the button for the assignment.
The button you pressed appears in reverse video.
Using any of the following methods, select one of the four regions for the
setting.
• Press directly on the list in the upper part of the right side.
• Press the arrow keys to scroll the reverse video cursor in the list in the
upper part of the right side.
• Turn the knob.