Suzuki GRAND VITARA Owner's Manual page 1085

6) Remove water pump and generator drive belt
referring to "Water Pump and Generator Drive Belt
Removal and Installation (For J20 Engine): in
Section 1J".
7) Remove P/S pump mounting bolts (1) and then
remove P/S pump.
1
1
P/S Pump Components for M16 Engine Model
6
1. Suction connector
2. O-ring
3. Pressure switch
4. Flow control valve (Relief valve)
5. Spring
6. Plug
7. Pump cover
8. Cam ring
I5JB0A630028-02
18
(c)
14
13
16
4
5
2
2
(b)
9. Vane
10. Rotor
11. Snap ring
12. Side plate
13. Pulley (pump shaft)
14. Oil seal
15. Pump body
16. Flow control valve assembly
Power Assisted Steering System:
NOTE
Plug each port of removed pump to prevent
dust or any other foreign matter from
entering.
Installation
Reverse removal procedure, and then nothing the
following instructions.
NOTE
Fill specified power steering fluid after
installation and bleed air without failure
referring to "P/S System Air Bleeding
Procedure: ".
Tightening torque
P/S pump mounting bolt: 25 N·m (2.5 kgf-m, 18.0 lb-
ft)
High pressure pipe union bolt: 60 N·m (6.0 kgf-m,
43.5 lb-ft)
1
2
15
3
(a)
2
10
12
8
9
11
2
7
17 (a)
17. Cover bolt
18. Suction connector bolt
: 28 N⋅m (2.8 kgf-m, 20.5 lb-ft)
: 60 N⋅m (6.0 kgf-m, 43.5 lb-ft)
: 12 N⋅m (1.2 kgf-m, 9.0 lb-ft)
: Do not reuse.
6C-19
S5JB0A6306015
I5JB0A630003-01