Remote Audio Control Switch Symptom Diagnosis (If Equipped); Navigation Symptom Diagnosis (If Equipped); Repair Instructions; Ignition Switch Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Condition
Sound skips or is noisy
CD player is operative,
but all speakers does not
sound
Individual speaker is
noisy or inoperative
Sound quality or volume
is poor

Remote Audio Control Switch Symptom Diagnosis (If Equipped)

Condition
Audio system is
operative, but remote
control switch does not
control audio system

Navigation Symptom Diagnosis (If Equipped)

Condition
No displaying of
navigation

Ignition Switch Removal and Installation

Removal
1) Disconnect negative cable at battery.
2) Confirm that ignition key is removed.
3) Remove steering column hole cover (1).
4) Turn steering wheel to remove steering column
cover screws (3) and then remove steering column
covers (2).
2
1
Possible cause
CD-ROM faulty
Driving vibration
Water droplets form on internal lens
Radio assembly installed incorrectly
Radio assembly faulty
Wiring and/or grounding faulty
Radio assembly faulty
Wiring and/or grounding faulty
Speaker faulty
Radio assembly faulty
CD-ROM faulty
Wiring and/or grounding faulty
Speaker installed incorrectly
Speaker faulty
Possible cause
Remote audio control switch faulty
Contact coil faulty
Wiring and/or grounding faulty
Radio assembly faulty
Possible cause
Circuit fuse Blown
Wiring and/or grounding faulty
Navigation unit faulty

Repair Instructions

S5JB0A9306001
3
3
I5JB0A940020-01
Instrumentation / Driver Info. / Horn:
Correction / Reference Item
—
—
Dry about 1 hour with power on.
Install correctly.
Replace radio assembly.
Repair as necessary.
Replace radio assembly.
Repair as necessary.
Replace speaker.
Replace radio assembly.
—
Repair as necessary.
Install correctly.
Replace speaker.
Correction / Reference Item
Check remote audio control switch referring to
"Remote Audio Control Switch Inspection: ".
Replace contact coil.
Repair as necessary.
Replace radio assembly.
Correction / Reference Item
Replace fuse and check for short circuit.
Repair circuit.
Replace unit.
5) Disconnect couplers (1) from ignition switch (2).
6) Remove ignition switch (2) from key cylinder (3).
2
1
Installation
Reverse removal procedure.
9C-12
S5JB0A9304017
S5JB0A9304021
1
3
I4RS0A930008-01