Suzuki GRAND VITARA Owner's Manual page 1308

8B-106 Air Bag System:
4) Remove side curtain-air bag (inflator) module bolts
(1) and clip (2).
1
1
1
5) Remove side curtain-air bag (inflator) module.
WARNING
!
• When carrying a live air bag (inflator)
module, make sure the bag opening is
pointed away from you.
Never carry air bag (inflator) module by
wires or connector on the side of the
module. In case of an accidental
deployment, the bag will then deploy with
minimal chance of injury.
• As the live curtain air bag (inflator) module
must be kept with its bag facing up while
being stored or left standing. This is
necessary so that a free space is provided
to allow the air bag to expand in the
unlikely event of accidental deployment.
• Observe "Precautions on Handling and
Storage of Air Bag System Components: "
for handling and storing it.
Otherwise, personal injury may result.
Installation
WARNING
!
Do not install side curtain-air bag (inflator)
module while twisted or bent. Otherwise, side
curtain-air bag (inflator) module may not
deploy and injury may result.
1) Install side curtain-air bag (inflator) module (1) with
2) Tighten side curtain-air bag (inflator) module bolts (3)
1
2
1
I5JB0A820086-01
3) Connect side curtain-air bag (inflator) module
4) Install head lining referring to "Head Lining Removal
5) Enable air bag system. Refer to "Enabling Air Bag
clip (2) and bolts.
to specified torque.
Tightening torque
Side curtain-air bag (inflator) module bolts (a):
10 N·m (1.0 kgf-m, 7.5 lb-ft)
3, (a) 3, (a)
3, (a)
connector (1) securely as shown in figure.
a) Connect connector.
b) Lock connector with lock button (2).
b)
a)
2
and Installation: in Section 9H".
System: ".
3, (a)
2
3, (a)
1
I5JB0A820087-01
1
I5JB0A820088-01