Suzuki GRAND VITARA Owner's Manual page 1188

7B-79 Air Conditioning System:
Magnet Clutch Removal and Installation for J20
Engine Model
Removal
1) Remove compressor from vehicle referring to
"Compressor Assembly Removal and Installation for
J20 Engine Model: ".
2) Fix armature plate (1) with special tool (A) and
remove armature plate bolt.
Special tool
(A): 09991–06310
NOTE
Do not reuse armature plate bolt.
1
3) Remove armature plate.
4) Remove shim(s) from shaft.
5) Using special tool (A), remove snap ring (1).
Special tool
(A): 09900–06107
(A)
S5JB0A7206049
2
(A)
I5JB0A720071-01
1
I5JB0A720072-01
6) Remove magnet clutch pulley (1) with puller (2).
NOTE
Be careful not to damage pulley.
7) Remove snap ring (1) using special tool (B), and
then remove magnet clutch coil (1).
Special tool
(A): 09900–06107
Installation
1) Install magnet clutch coil (3).
NOTE
Protrusion (1) on underside of magnet clutch
coil and hole (2) on compressor body
assembly must match to stop movement of
magnet clutch coil and to locate lead wire
correctly.
2
1
2
I5JB0A720073-01
(A)
1
I5JB0A720074-02
1
3
I5JB0A720075-01