Specifications; Tightening Torque Specifications - Suzuki GRAND VITARA Owner's Manual

Tightening Torque Specifications

Fastening part
Camshaft housing bolts
Camshaft housing bolt
Cylinder head cover nut
Starting motor terminal nut
Generator terminal nut
Timing chain cover bolt and nut
Idler pulley nut
Generator belt tensioner bolt
Crankshaft pulley bolt
Camshaft timing sprocket bolt
Timing chain tensioner adjuster No.2 bolt
Timing chain tensioner adjuster No.2 nut
Timing chain tensioner nut
Timing chain tensioner adjuster No.1 bolt
Timing chain guide No.1 bolt
Cylinder head bolt (M10)
Cylinder head bolt (M6)
Connecting rod bolt
Crankcase bolt with 10 mm thread diameter ((1)
– (10))
Crankcase bolt with 8 mm thread diameter ((11)
– (22))
CKP sensor bolt
Flywheel bolt
Drive plate bolt
Engine front mounting bracket bolt
NOTE
The specified tightening torque is also described in the following.
"Engine Mountings Components: For J20 Engine"
"Timing Chain Cover Components: For J20 Engine"
"2nd Timing Chain and Chain Tensioner Components: For J20 Engine"
"1st Timing Chain and Chain Tensioner Components: For J20 Engine"
"Camshafts, Tappet and Shim Components: For J20 Engine"
"Valves and Cylinder Head Components: For J20 Engine"
"Pistons, Piston Rings, Connecting Rods and Cylinders Components: For J20 Engine"
"Main Bearings, Crankshaft and Cylinder Block Components: For J20 Engine"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information: in Section 0A".
Engine Mechanical: For J20 Engine 1D-129

Specifications

Tightening torque
N⋅m kgf-m
11 N⋅m (1.1 kgf-m, 8.0 lb-ft) for tightening of
special tool
11 1.1
11 1.1
11 1.1
7 0.7
11 1.1
42 4.2
25 2.5
150 15.0
80 8.0
11 1.1
45 4.5
25 2.5
11 1.1
9 0.9
Tighten 52 N⋅m (5.2 kgf-m, 38.0 lb-ft), 82
N⋅m (8.2 kgf-m, 59.5 lb-ft), 0 N⋅m (0 kgf-m,
0 lb-ft), 52 N⋅m (5.2 kgf-m, 38.0 lb-ft) and
103 N⋅m (10.3 kgf-m, 74.5 lb-ft) by the
specified procedure.
11 1.1
Tighten 15 N⋅m (1.5 kgf-m, 11.0 lb-ft), 45°
and 45° by the specified procedure.
Tighten 40 N⋅m (4.0 kgf-m, 29.0 lb-ft), 0
N⋅m (0 kgf-m, 0 lb-ft), 40 N⋅m (4.0 kgf-m,
29.0 lb-ft) and 58 N⋅m (5.8 kgf-m, 42.0 lb-ft)
by the specified procedure.
Tighten 26 N⋅m (2.6 kgf-m, 19.0 lb-ft) by the
specified procedure.
11 1.1
70 7.0
65 6.5
55 5.5
S5JB0A1427001
Note
lb-ft
8.0 / /
8.0
8.0
5.0
8.0
30.5
18.5
108.5
57.5
8.0
33.0
18.0
8.0
6.5
8.0
/
8.0
51.0
47.0
40.0