Suzuki GRAND VITARA Owner's Manual page 969

26) Remove center support assembly (1).
27) Remove retaining ring (1), planetary gear assembly
leaf spring, bearing and bearing race.
NOTE
• Use care not to cause damage to case
when removing retaining ring.
• Confirm direction of bearing and bearing
race for reassembly.
28) Remove apply tube.
29) Remove reverse brake return spring (1) using
special tools.
Special tool
(A): 09926–98390
(B): 09944–88210
(C): 09926–98320
1
2
2. Nut M12 x 1.75
30) Remove reverse brake piston (1) by applying
IYSQ01510104-01
1
31) Apply compressed air (400 – 800 kPa, 4 – 8 kg/cm
32) Remove brake reaction sleeve (1) and secondary
I5JB0A510084-01
(A)
(C)
(B)
I5JB0A510085-01
Automatic Transmission/Transaxle:
compressed air (400 – 800 kPa, 4 – 8 kg/cm
113 psi) to oil hole (2).
2
57 – 113 psi) to oil hole (3) to remove brake reaction
sleeve (1) and secondary reverse piston (2).
reverse piston (2) by using special tools.
Special tool
(A): 09920–20310
3
(A)
5A-101
, 57 –
2
1
I5JB0A510086-02
2 ,
(A)
(A)
1
2
I5JB0A510087-02