Oil Cooler Hose And Pipes Removal And Installation - Suzuki GRAND VITARA Owner's Manual

5A-90 Automatic Transmission/Transaxle:
Oil Cooler Hose and Pipe Components
[A]: View from A side 3. Oil hose No.1
1. Radiator 4. Oil hose No.4
2. Oil hose No.3 5. Oil pipe No.1
Oil Cooler Hose and Pipes Removal and
Installation
Removal
1) Lift up vehicle.
2) Make sure to wash dirt off from around pipe joints.
3) With engine is cool, loosen oil cooler pipe union bolts
(2) with oil outlet union locked and remove oil cooler
pipes (1) from oil outlet unions and hoses.
NOTE
To avoid fluid leakage, plug open ends of oil
outlet unions and hoses right after they are
disconnected.
6. Oil pipe No.2 9. Oil pipe No.1 bolt
7. Oil pipe union bolt 10. Oil pipe No.2 bolt
8. Oil pipe tube bolt : 25 N⋅m (2.5 kgf-m, 18.0lb-ft)
S5JB0A5106059
3. Pipe bolt
S5JB0A5106058
I5JB0A510032-03
: 10 N⋅m (1.0 kgf-m, 7.5 lb-
ft)
I5JB0A510153-01