Suzuki GRAND VITARA Owner's Manual page 960

5A-92 Automatic Transmission/Transaxle:
Solenoid Valves (Shift Solenoid-A, Shift
Solenoid-B, TCC Pressure Control Solenoid and
Pressure Control Solenoid Inspection
Solenoid Valves (Shift Solenoid–A and Shift
Solenoid–B)
Resistance check
CAUTION
!
Be very careful as dust etc. does not enter
when solenoid valves are inspected.
Measure resistance between terminal (2) and solenoid
valve body. If resistance is out of specification, replace
solenoid valve.
Shift solenoid–A and Shift solenoid–B resistance
Standard: 11 – 15 Ω (at 20 °C (68 °F))
1
1. Shift solenoids
Operation Check
• With solenoid connected to battery (2) as shown in the
figure, check that solenoid valve is actuated with click
sound.
1
1. Shift solenoids
• With shift solenoid valve (1) connected to battery (2),
confirm that shift solenoid valve is open by blowing air
(50 – 200 kPa, 0.5 – 2.0 kg/cm
solenoid valve as shown in the figure.
• With shift solenoid valve (1) not connected to battery
(2), confirm that shift solenoid valve is closed by
blowing air (50 – 200 kPa, 0.5 – 2.0 kg/cm
psi) into solenoid valve as shown in the figure.
S5JB0A5106061
2
I5JB0A510054-01
2
I5JB0A510055-01
2 , 7 – 28.5 psi) into
, 7 – 28.5
2
CAUTION
!
Do not insert air gun against strainer
installed on inlet of solenoid valve too deeply,
when blowing air into solenoid valve. If not,
the strainer will be damaged.
Pressure Control Solenoid Valve and TCC Pressure
Control Solenoid Valve
Resistance check
CAUTION
!
Be very careful as dust etc. does not enter
when pressure control solenoid valves are
inspected.
Measure resistance between pressure control solenoid
valves (Pressure control solenoid and TCC pressure
control solenoid) (1) terminals. If resistance is out of
specification, replace valve body assembly.
Pressure control solenoid and TCC pressure control
solenoid resistance
Standard: 5.0 – 5.6 Ω (at 20 °C (68 °F))
1
2
1
2
I5JB0A510056-01
1
I5JB0A510057-01