Air Intake Control Actuator Removal And Installation; Air Intake Control Actuator Inspection; Temperature Control Actuator Removal And Installation; Temperature Control Actuator Inspection - Suzuki GRAND VITARA Owner's Manual

Grand vitara
Hide thumbs Also See for GRAND VITARA:
Table of Contents

Advertisement

Air Intake Control Actuator Removal and
Installation
Refer to "Air Intake Control Actuator Removal and
Installation: in Section 7A".

Air Intake Control Actuator Inspection

Refer to "Air Intake Control Actuator Inspection: in
Section 7A".
Temperature Control Actuator Removal and
Installation
Refer to "Temperature Control Actuator Removal and
Installation: in Section 7A".

Temperature Control Actuator Inspection

Refer to "Temperature Control Actuator Inspection: in
Section 7A".

HVAC Control Module Removal and Installation

Refer to "HVAC Control Module Removal and
Installation: in Section 7A".
A/C Compressor Drive Belt Inspection and
Adjustment
For M16 engine model referring to "P/S Pump and A/C
Compressor (If Equipped) Drive Belt Inspection and
Adjustment for M16 Engine Model: in Section 6C".
For J20 engine model referring to "Water Pump and
Generator Drive Belt On-Vehicle Inspection (For J20
Engine): in Section 1J".
A/C Compressor Drive Belt Removal and
Installation
For M16 engine model referring to "P/S Pump and A/C
Compressor (If Equipped) Drive Belt Removal and
Installation for M16 Engine Model: in Section 6C".
For J20 engine model referring to "Water Pump and
Generator Drive Belt Removal and Installation (For J20
Engine): in Section 1J".

A/C Compressor Relay Inspection

For M16 Engine Model
S5JB0A7206060
1) Disconnect negative (–) cable at battery.
2) Remove compressor relay (1) from vehicle.
3) Check that there is no continuity between terminal
"c" and "d". If there is continuity, replace relay.
S5JB0A7206061
4) Connect battery positive (+) terminal to terminal "b"
of relay.
Connect battery negative (–) terminal to terminal "a"
of relay.
Check continuity between terminal "c" and "d".
If there is no continuity when relay is connected to
S5JB0A7206062
the battery, replace relay.
S5JB0A7206063
S5JB0A7206023
S5JB0A7206039
S5JB0A7206064
For J20 Engine Model
1) Disconnect negative cable at battery.
2) Remove included in integration relay No.2 (1) from
vehicle.
Air Conditioning System:
1
c
a
b
d
1
7B-72
S5JB0A7206040
I5JB0A720056-01
I5JB0A720057-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents