Rear Brake Shoe Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Rear Brake Shoe Removal and Installation

WARNING
!
Use special care when installing brake shoe
return spring. Failure in its proper installation
may allow it to springback and cause
personal injury.
Removal
1) Remove brake drum referring to "Rear Brake Drum
Removal and Installation: ".
2) Fully turn adjuster (1) to reduce brake shoe adjuster.
2
1
2. Adjuster pawl lever
3) Remove shoe hold down springs (1) by turning shoe
hold down pins (2).
4) Remove upper shoe return spring (1), brake adjuster
(2), adjuster pawl lever (3) and spring.
5) Remove brake shoes (4) and lower shoe return
spring (5).
3
4
5
6) Disconnect parking brake shoe lever (1) from
S5JB0A4306006
1
7) Remove push nut (1).
8) Remove parking brake shoe lever (2) from brake
I5JB0A430019-01
Installation
1) Assemble parts in reverse order of removal
2) Before install brake shoe, be sure to fully turn brake
3) Install shoe hold down springs (1) by pushing them
I2RH01430012-01
2
1
4
I5JB0A430006-01
parking brake cable (2).
shoe (3).
1
procedure.
adjuster to reduce.
down in place and turning hold down pins (2).
Rear Brakes: 4C-5
I2RH01430013-01
3
2
I5JB0A430007-01
I5JB0A430010-01