Information Display (Clock) Removal And Installation; Audio Unit Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Installation
Reverse removal procedure noting the following.
• When installing each part, be careful not to catch any
cable or wiring harness.
• Tighten instrument panel mounting bolts to specified
torque
Tightening torque
Instrument panel mounting bolt (a): 23 N·m (2.3
kgf-m, 17.0 lb-ft)
(a)
• Tighten steering column mounting nuts referring to
"Steering Column Assembly Removal and Installation:
in Section 6B".
• Enable air bag system referring to "Enabling Air Bag
System: in Section 8B".
Information Display (Clock) Removal and
Installation
Removal
1) Remove audio unit referring to "Audio Unit Removal
and Installation: ".
2) Remove center ventilation louver (1) from instrument
panel (2) pulling it arrow direction as shown.
3) Disconnect hazard switch connector.
1
3. screw
4) Remove information display (clock) (1) from
5) Disconnect information display (clock) coupler.
(a)
Installation
Reverse removal procedure.
I5JB0A930015-01

Audio Unit Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Remove instrument panel center garnish trims (1).
S5JB0A9306018
3) Remove 6 mounting screws (1).
2
4) Disconnect electrical connectors from audio unit and
5) Remove audio unit (2) with HVAC control module
3
I5JB0A930016-01
6) Remove audio unit from HVAC control module.
Installation
Reverse removal procedure.
Instrumentation / Driver Info. / Horn:
instrument panel (2) pulling it in arrow direction
shown in figure.
1
HVAC control module.
from instrument panel.
9C-18
2
I5JB0A930017-01
S5JB0A9306019
1
I5JB0A930018-03
2
1
I5JB0A930019-04