Front Door Glass Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Front Door Glass Removal and Installation

Removal
1) Remove door mirror trim (1), front door inner garnish
(2) (3 door model only) and door trim screw cover
(3).
2) Remove door trim screw (5).
3) Remove door trim (4) as shown.
And disconnect power window switch lead wire and
door illumination lamp lead wire at coupler.
[A]
2
[B]
[A]: 5 door model
4) Remove door sealing cover (1).
1
S5JB0A9506003
1
3
5
4
1
3
5
4
I5JB0A950010-01
[B]: 3 door model
I5JB0A950011-01
Glass / Windows / Mirrors:
5) Remove door glass mounting screws (1).
6) Remove door glass (2) while tilting it as shown.
2
Installation
Reverse removal procedure noting the following
instructions.
• If there is deformity for glass run, replace it with a new
one.
• Tighten door glass rear mounting screw (1) first, and
then tighten door glass front mounting screw (2).
• Secure door sealing cover (1) with adhesive (2).
1
9E-14
1
I5JB0A950012-01
1
2
I5JB0A950013-01
2
I5JB0A950014-01