A/C Evaporator Removal and Installation
Removal
1) Remove HVAC unit referring to "HVAC Unit Removal
and Installation: ".
2) Remove evaporator (1) from HVAC unit by
disassembling HVAC unit.
Installation
Reverse removal procedure to install A/C evaporator
nothing the following instructions.
A/C Evaporator Inspection
1) Check evaporator fins for blockage. If found clogged,
use compressed air to clean the fins.
CAUTION
!
• Do not use water for cleaning of
evaporator.
• Be careful not to damage evaporator fins.
If evaporator fin is bent, straighten it by
using a screwdriver or pair of pliers. If any
leakage is found from fitting or tube, repair
or replace evaporator.
2) Check inlet and outlet fittings for crack or scratch.
Repair them as required.
S5JB0A7206013
1
I5JB0A720045-02
S5JB0A7206014
Air Conditioning System:
A/C Evaporator Temperature Sensor Removal
and Installation
Removal
1) Remove A/C evaporator (1) referring to "A/C
Evaporator Removal and Installation: ".
2) Remove A/C evaporator temperature sensor (2)
from evaporator.
Installation
A/C Evaporator Temperature Sensor Inspection
Check resistance between A/C evaporator temperature
sensor terminals. If check result is not in specification,
replace A/C evaporator temperature sensor with the new
one.
A/C evaporator temperature sensor resistance
11.2 – 11.5 kΩ at 0 °C (32 °F)
3.8 – 3.9 kΩ at 25 °C (77 °F)
(kΩ)
11.4
Resistance
3.9
3.3
S5JB0A7206015
1
2
I5JB0A720046-01
S5JB0A7206016
0
25
30
(˚C)
32
77
86
(˚F)
Temperature
I5JB0A720090-03
7B-68