9F-11 Security and Locks:
Rear End Door Lock Assembly Components
1. Rear end door latch assembly
(rear end door switch is built in this assembly)
2. Rear end door opener switch
3. Latch striker
Rear End Door Lock Assembly Removal and
Installation
Removal
1) Remove door trim (1) from rear end door panel (2).
(a)
4. Shim
5. Door handle
6. Emergency lever
2) Disconnect door lock motor lead wire and door
opening control rod.
S5JB0A9606011
3) Loosen door latch bolts (1) and remove door latch
assembly (2).
I5JB0A960016-01
(a)
(b)
7. Rear end door request switch
: 10 N⋅m (1.0 kgf-m, 7.5 lb-ft)
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
S5JB0A9606010
I5JB0A960015-01
2
1
I5JB0A960017-01