Control Rod / Bushing Disassembly And Assembly; Control Rod Check - Suzuki GRAND VITARA Owner's Manual

2C-12 Rear Suspension:
Control Rod / Bushing Disassembly and
Assembly
Disassembly
1) Push out control rod bushing by using hydraulic
press (1) and special tool.
Special tool
(A): 09913–84510
1
(A)
Assembly
1) Press-fit control rod bushing (1) by using press (2)
and special tool.
CAUTION
!
Be sure to use new bushing.
Special tool
(A): 09913–85210
2
(A)
1
2) Press-fit bushing so that dimensions "A" and "B" in
figure become equal.
S5JB0A2306029

Control Rod Check

• Inspect for cracks, deformation or damage.
• Inspect bushing for wear and breakage.
If any faulty condition is found, replace.
I5JB0A230023-02
I5JB0A230082-01
I5JB0A230024-01
S5JB0A2306011
I5JB0A230025-01