Suzuki GRAND VITARA Owner's Manual page 749

12) Remove needle bearings (1), front drive shaft (2)
and thrust needle bearing (4) from rear output shaft
(3).
3
1
13) Remove differential lock clutch sleeve (1) from rear
output shaft (2).
2
14) Remove front drive sprocket bush (1) from rear
output shaft (2).
15) Take out front drive sprocket (1), front output shaft
assembly (2), drive chain (3) and needle bearing (4)
from rear case (5) all at once.
1
4
Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-61
1
2
4
I5JB0A331021-01
1
I5JB0A331022-01
1
2
I5JB0A331023-01
2
5
3
I5JB0A331024-01
16) Remove snap ring (1), and then remove rear output
shaft assembly (2) from rear case (3).
1
17) Remove rear oil seal (1) from rear case (2) using flat
end rod or the like, if necessary.
18) Remove needle bearing (1) from rear case (2) using
special tool, if necessary.
Special tool
(A): 09913–76010
19) Remove input gear plate bolts (1) from front case (2).
2
3
I5JB0A331025-01
1
2
I5JB0A331026-01
(A)
1
2
I5JB0A331027-01
1
2
I5JB0A331028-02