Suzuki GRAND VITARA Owner's Manual page 821

8) Install wheel and tighten wheel nuts to specified
torque.
Tightening Torque Specifications
Fastening part
Wheel nut
Wheel cylinder mounting bolt
Brake pipe flare nut
Rear wheel hub housing bolt
Parking cable cap nut
Rear axle nut
NOTE
The specified tightening torque is also described in the following.
"Rear Drum Brake Assembly Components: "
Reference:
For the tightening torque of fastener not specified in this section, refer to "Fastener Information: in Section 0A".
Recommended Service Material
NOTE
Required service material is also described in the following.
"Rear Drum Brake Assembly Components: "
Specifications
N⋅m
100
13
16
50
11
200
Special Tools and Equipment
9) Check to ensure that brake drum is free from
dragging and proper braking is obtained. Remove
vehicle from hoist and perform brake test (foot brake
and parking brake).
Tightening torque
kgf-m lb-ft
10.0 72.5
1.3 9.5
1.6 12.0
5.0 36.5
1.1 8.0
20.0 145.0
Rear Brakes: 4C-9
S5JB0A4307001
Note
S5JB0A4308001