9E-23 Glass / Windows / Mirrors:
Door Mirror Removal and Installation
When removing or installing door mirror, refer to the
figure in "Door Mirror Components: ".
Power Door Mirror Switch Inspection (If
Equipped)
1) Remove driver side door trim referring to step 1) to
3) of "Front Door Glass Removal and Installation: ".
2) Remove power window main switch from door trim.
3) Check for continuity between terminals at each
switch position.
If check result is not as specified, replace door mirror
switch.
L
A
C
R
B
Up
Down
Left
Right
B
A
C
D
F
G
E
Power Door Mirror Actuator Inspection (If
Equipped)
1) Remove door trim referring to step 1) to 3) of "Front
Door Glass Removal and Installation: ".
2) Disconnect door mirror coupler (1).
3) Check that door mirror operates properly when
battery voltage is applied to connector terminals.
4) Connect battery positive (+) and negative (–)
terminal to the door mirror terminals as shown.
If it does not follow the table's operation, replace
door mirror assembly.
S5JB0A9506019
S5JB0A9506020
E
D
G
F
I5JB0A950039-01
S5JB0A9506021
Terminal
Operation
Up
Down
Left
Right
A
B
C
Door Mirror Heater Inspection (If Equipped)
1) Remove door trim referring to step 1) to 3) of "Front
Door Glass Removal and Installation: ".
2) Disconnect door mirror connector (1).
3) Check for continuity between terminals "a" and "b".
If no continuity, replace outside mirror.
"b"
"a"
A
B
C
I5JB0A950040-01
S5JB0A9506022
I5JB0A950041-01