Visual Inspection; A/C System Performance Inspection - Suzuki GRAND VITARA Owner's Manual

Grand vitara
Hide thumbs Also See for GRAND VITARA:
Table of Contents

Advertisement

Visual Inspection

Visually check the following parts and systems.
• Refrigerant ---- leakage and amount
• A/C pipe or hose ---- disconnection, looseness and
deterioration
• A/C compressor drive belt ---- looseness and damage
• Battery ---- fluid level and corrosion of terminal
• Connectors of electric wire harness ---- disconnection and
friction
• Fuses ---- burning
• Parts ---- installation and damage
• Other parts that can be checked visually

A/C System Performance Inspection

1) Confirm that vehicle and environmental conditions
are as follows.
• Vehicle is put indoors.
• Ambient air temperature is within 15 – 35 °C (59 –
95 °F).
• Relative humidity is within 30 – 70%.
• There is no wind indoors.
• HVAC unit is normal condition.
• There is no air leakage from air ducts.
• Condenser fins are clean.
• Are filter is not clogged with dirt and dust.
• Battery voltage is 12 V or more.
• Radiator cooling fan operates normally.
2) Make sure that high pressure valve (1) and low
pressure valve (2) of manifold gauge (3) are firmly
closed.
3) Connect high pressure charging hose (4) to high
pressure service valve (5) on vehicle, and connect
low pressure charging hose (6) to low pressure
service valve (7) on vehicle.
4) Bleed the air in charging hoses by loosening their
respective nuts on manifold gauge, utilizing the
refrigerant pressure. When a hiss is heard,
immediately tighten nut.
CAUTION
!
Do not interchange high and low pressure
charging hoses by mistake.
Inspection Item
S5JB0A7204027
Air Conditioning System:
Correction
Refer to "A/C Compressor Drive Belt Inspection
and Adjustment: ".
3
2
1
4
6
5
5) Warm up engine to normal operating temperature
(engine coolant temperature at 80 – 90 °C (176 –
194 °F)) and keep it at specified idle speed.
6) Operate A/C at the following conditions.
• A/C switch at ON position
• Blower speed selector at max position
• Air flow selector at "VENT" position
• Temperature selector at max cool position
• Vehicle door at all open
• Air inlet door at recirculation position
7B-20
S5JB0A7204008
7
I5JB0A720010-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents