Windshield Wiper Motor Inspection - Suzuki GRAND VITARA Owner's Manual

9D-7 Wipers / Washers:

Windshield Wiper Motor Inspection

NOTE
Make sure that battery voltage is 12 V or
more.
1) Disconnect negative (–) cable at battery.
2) Remove windshield wiper arms with wiper blades
referring to "Windshield Wiper Removal and
Installation: ".
3) Remove cowl top garnish referring to "Cowl Top
Components: in Section 9K".
4) Disconnect coupler from windshield wiper motor.
5) Reinstall windshield wiper arms with wiper blade. For
details, refer to Step 4) of "Installation" in "Windshield
Wiper Removal and Installation: ".
6) Check windshield wiper motor for operation as
follows
• For motor operation in low speed
a. Connect battery positive (+) terminal to
terminal "1" and its negative (–) terminal to
terminal "5".
b. Check if wiper arm reciprocation speed is as
specification. If check result is not as
specified, replace motor.
Specification
44 – 52 r/min (rpm)
[A]
1
5
[B]
1
[A]: Left-hand steering vehicle
[B]: Right-hand steering vehicle
S5JB0A9406005
5
I5JB0A940010-01
• For motor operation in high speed
a. Connect battery positive (+) terminal to "2"
and its negative (–) terminal to terminal "5".
b. Check if motor revolution speed is as
specification. If check result is not as
specified, replace motor.
Specification
64 – 78 r/min (rpm)
[A]
2
5
[B]
2
5
[A]: Left-hand steering vehicle
[B]: Right-hand steering vehicle
I5JB0A940011-01