Fuel Level Sensor Inspection; Oil Pressure Switch Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Fuel Level Sensor Inspection

• Check that resistance between terminals "a" and "b"
of fuel level sensor changes with change of float
position.
• Check resistance between terminals "a" and "b" at
each float position in the following.
If the measured value is out of specification, replace
fuel pump and/or sub fuel level sensor.
Main fuel level sensor [A] specifications
Float position
Full Upper
M16
"C"
engine
Full Lower
model
"D"
Full Upper
J20
"C"
engine
Full Lower
model
"D"
Sub fuel level sensor [B] specifications
Float position
Full Upper
M16
"C"
engine
Full Lower
model
"D"
Full Upper
J20
"C"
engine
Full Lower
model
"D"
S5JB0A9306005
Resistance (Ω)
193.7 mm
19.0 – 21.0
(7.626 in.)
42.2 mm
111.9 – 115.3
(1.661 in.)
196.8 mm
19.0 – 21.0
(7.748 in.)
34.9 mm
129.0 – 132.4
(1.374 in.)
Resistance (Ω)
48.1 mm
19.0 – 21.0
(1.894 in.)
252.8 mm
164.7 – 168.1
(9.953 in.)
64.1 mm
19.0 – 21.0
(2.524 in.)
244.8 mm
147.6 – 151.0
(9.638 in.)
Instrumentation / Driver Info. / Horn:
[A]
"a" "b"
2
"c"
"d"
[B]
"c"
"d" 2
1. Fuel pump
2. Float

Oil Pressure Switch Removal and Installation

For removal and installation, refer to "Oil Pressure
Check: For M16A Engine with VVT in Section 1E" or "Oil
Pressure Check: For J20 Engine in Section 1E".
9C-14
1
"a" "b"
I5JB0A930030-02
S5JB0A9306006