Trailing Rod Removal And Installation - Suzuki GRAND VITARA Owner's Manual

Trailing Rod Removal and Installation

Removal
1) Hoist vehicle and remove rear wheels.
2) Support lower arm (1) with jack (2).
3) Remove air suction pipe bolts (1) for 5door model
only.
1
4) Remove trailing rod front bolt (1) and trailing rod rear
bolt (2) and then trailing rod (3).
2
S5JB0A2306012
1
2
I5JB0A230018-01
1
I5JB0A230026-01
3
1
I5JB0A230027-01
5) Remove trailing rod mount bracket bolt (1) and then
trailing rod mount bracket (2).
2
1
Installation
1) Install trailing rod mount bracket and then tighten
trailing rod mount bracket bolt to specified torque.
CAUTION
!
• Tighten the bolts in order of bolt (1), (2)
and (3).
• Do not reuse removed trailing rod mount
bracket bolt.
Tightening torque
Trailing rod mount bolt (a): 105 N·m (10.5 kgf-m,
76.0 lb-ft)
1,(a)
Rear Suspension: 2C-13
1
I5JB0A230028-02
2,(a)
3,(a)
I5JB0A230029-02