Dtc B1322 / B1326: Left / Right Side-Air Bag Initiator Circuit Resistance Low - Suzuki GRAND VITARA Owner's Manual

DTC B1322 / B1326: Left / Right Side-Air Bag Initiator Circuit Resistance Low

Wiring Diagram
Refer to "DTC B1321 / B1325: Left / Right Side-Air Bag Initiator Circuit Resistance High: ".
CAUTION
!
Be sure to observe instructions under CAUTION in "Air Bag Diagnostic System Check Flow".
DTC Will Set when
The combined resistance of the side-air bag (inflator) module (left or right), harness wiring and connector terminal
contact is below a specified value for specified time.
Flow Test Description
Step 1: Check whether malfunction is in side-air bag (inflator) module.
Step 2: Check side-air bag initiator circuit in floor harness.
Step 3: Check side-air bag initiator circuit in seat harness.
DTC Troubleshooting
Step
1 1) With ignition switch OFF, disconnect side-air bag
(inflator) module connector under front seat cushion.
2) Check proper connection to left or right side-air bag
(inflator) module at terminals in "L25" or "L30" connector.
3) If OK, then connect special tools (B) and (C) to side-air
bag (inflator) module connector disconnected at the Step
1.
Special tool
(B): 09932–75010
(C): 09932–78340
STEERING WHEEL
4) Check SDM DTC.
With ignition switch ON, is DTC B1322 or B1326 still
indicated?
Action
"L25", "L30"
(C)
(B)
I4RS0A820032-01
Air Bag System:
Yes
Go to Step 2.
8B-77
S5JB0A8204031
No
Go to Step 3.