Washer Tank And Washer Pump Removal And Installation; Washer Pump Inspection - Suzuki GRAND VITARA Owner's Manual

9D-5 Wipers / Washers:
Washer Tank and Washer Pump Removal and
Installation
Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
Components: in Section 9K".
3) Remove right headlight housing from vehicle body
referring to "Headlight Housing Removal and
Installation: in Section 9B".
4) Remove grommet (1) and upper part (2) of washer
tank.
5) Remove washer tank attaching bolts (4).
6) Disconnect washer pump lead wire couplers and
hoses.
7) Remove washer tank (1).
8) Remove windshield washer pump (2), rear washer
pump (3) (if equipped) and headlight washer pump
(5) (if equipped) from washer tank (1).
4
2
3
Installation
Install washer tank and washer pump by reversing
removal procedure, noting the following instructions.
S5JB0A9406002
• Connect washer pump connector(s) securely.
• Tighten washer tank bolts to specified torque.
Tightening torque
Washer tank bolt (a): 4 N·m (0.4 kgf-m, 3.0 lb-ft)
(a)
2
1
• After installing headlight housing be sure to inspect
and adjust aiming referring to "Headlight Aiming
Adjustment with Screen: in Section 9B".

Washer Pump Inspection

I5JB0A940003-01
1) Connect battery positive (+) and negative (–)
terminals to pump (+) and (–) terminals respectively.
2) Check front, rear or headlight washer pump for
operation.
If pump does not operate, replace washer pump.
1
5
I5JB0A940005-01
[A] [B]
(+)
(–)
(+)
[C]
(+)
(–)
[A]: Windshield washer pump
[B]: Rear washer pump
[C]: Headlight washer pump
I5JB0A940004-01
S5JB0A9406003
(–)
I5JB0A940006-01