Master Cylinder Assembly Inspection - Suzuki GRAND VITARA Owner's Manual

4A-15 Brake Control System and Diagnosis:
4) Connect brake pipes to master cylinder and tighten
brake pipe flare nuts (1) to specified torque.
Tightening torque
Brake pipe flare nut (a): 16 N·m (1.6 kgf-m, 12.0
lb-ft)
5) Connect clutch reservoir hose (1) to reservoir (2) for
M/T vehicle.
1
6) Connect reservoir lead wire at coupler.
7) Fill reservoir with specified brake fluid.
8) After installing, check brake pedal play and bleed air
from brake and clutch system, referring to "Brake
Pedal Play Check: " and "Air Bleeding of Brake
System: ".
9) Perform brake test and check each installed part for
fluid leakage.
1,(a)
I5JB0A410020-01
2
I5JB0A410012-02

Master Cylinder Assembly Inspection

• Check master cylinder for corrosion and smooth
operation.
• Inspect distance "a" to be the following.
If measurement is out of specification, replace master
cylinder assembly.
Distance
"a": 72.0 mm (2.83 in.) or more
S5JB0A4106017
I5JB0A410022-01