Gps Antenna Removal And Installation (If Equipped); Horn Removal And Installation; Horn Inspection; Horn Relay Inspection - Suzuki GRAND VITARA Owner's Manual

GPS Antenna Removal and Installation (If
Equipped)
Removal
1) Remove center ventilation louver referring to step 1)
and 2) of "Information Display (Clock) Removal and
Installation: ".
2) Disconnect GPS antenna connector from navigation
unit referring to "Audio Unit Removal and Installation:
".
3) Remove GPS antenna (1).
Installation
Reverse removal procedure.

Horn Removal and Installation

Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper referring to "Front Bumper
Components: in Section 9K".
3) Disconnect horn connector (1).
4) Remove horn (2).
2
1
Installation
Reverse removal procedure for installation.

Horn Inspection

1) Disconnect negative (–) cable at battery.
S5JB0A9306028
2) Remove front bumper referring to "Front Bumper
3) Disconnect horn connector (1).
4) Connect battery positive (+) to terminal of horn
1
I5JB0A930023-01

Horn Relay Inspection

1) Disconnect negative (–) cable at battery.
2) Remove horn relay (included in integration relay) (1)
S5JB0A9306022
2
1
I5JB0A930029-01
Instrumentation / Driver Info. / Horn:
Components: in Section 9K".
connector (2) and negative (–) terminal to body
ground.
If horn is not sounding, replace horn.
2
1
from main fuse box (2).
9C-20
S5JB0A9306023
1
2
I5JB0A930024-01
S5JB0A9306024
1
I5JB0A950031-01