Suzuki GRAND VITARA Owner's Manual page 599

Adjustment
Control rod adjustment
1) Loosen right and left control rod mount nuts (1).
2) Adjust toe and camber to satisfy the specification by
turning right and left control rod inner bolts (cam
bolts) (1) with the same amount.
NOTE
When bolt is turned a-direction, camber
becomes "+" and toe becomes "IN". When
bolt is turned b-direction, camber becomes
"–" and toe becomes "OUT".
[A]
b
a
2
1
[A]: Right side
[B]: Left side
3) After adjustment, tighten right and left nuts to
specified torque while holding cam bolt with another
wrench to prevent it from turning.
Tightening torque
Control rod mount nut: 135 N·m (13.5 kgf-m,
98.0 lb-ft)
1
I5JB0A230002-01
[B]
b a
2
1
I5JB0A230003-01
2. Control rod
Lower arm adjustment
1) Loosen right and left lower arm mount nuts (1).
1
1
2) Adjust toe and camber to satisfy the specification by
turning right and left lower arm inner bolts (cam
bolts) (1) with same amount.
NOTE
When bolt is turned a-direction, camber
becomes "+" and toe becomes "OUT". When
bolt is turned b-direction, camber becomes
"–" and toe becomes "IN".
[A]
a b
1
2
[A]: Left side
[B]: Right side
3) After adjustment, tighten right and left nuts to
specified torque while holding cam bolt with another
wrench to prevent it from turning.
Tightening torque
Lower arm mount nut: 135 N·m (13.5 kgf-m, 98.0
lb-ft)
Rear Suspension: 2C-3
I5JB0A230004-01
[B]
a
b
1
2
I5JB0A230005-01
2. Lower arm