Rear Brake Shoe Inspection; Wheel Cylinder Removal And Installation - Suzuki GRAND VITARA Owner's Manual

4C-6 Rear Brakes:
4) Install brake adjuster (2) and upper shoe return
spring (1).
5) Install adjuster pawl lever (3) and adjuster spring.
3
4
5
4. Brake shoe
5. Lower shoe return spring
6) For procedure hereafter, refer to "Rear Brake Drum
Removal and Installation: ".

Rear Brake Shoe Inspection

Parking Brake Shoe Lever
Inspect brake shoe lever for free movement against
brake shoe web. If defective, correct or replace.
Brake Adjuster
Check thread or ratchet of adjuster for wear, sticking and
corrosion.
If found defective, replace brake adjuster.
Springs
Inspect for damage or weakening.
Inspect each part with arrow for rust. If found defective,
replace.
2
1
4
I5JB0A430006-01
Brake Shoe
Refer to "Rear Brake Drum and Shoe Inspection: ".

Wheel Cylinder Removal and Installation

Removal
1) Remove brake drum referring to "Rear Brake Drum
S5JB0A4306007
2) Remove brake shoe referring to "Rear Brake Shoe
3) Loosen brake pipe flare nut (1) but only within the
4) Remove wheel cylinder mounting bolts (2).
I5JB0A430009-02
I5JB0A430011-01
Removal and Installation: ".
Removal and Installation: ".
extent that fluid does not leak.
Disconnect brake pipe from wheel cylinder and put
wheel cylinder bleeder plug cap (3) onto pipe to
prevent fluid from spilling.
2
3
I5JB0A430012-02
S5JB0A4306008
1
I5JB0A430013-01