Suzuki GRAND VITARA Owner's Manual page 1246

8B-44 Air Bag System:
DTC Troubleshooting
Step
1 1) With ignition switch OFF, disconnect passenger air bag
(inflator) module connector.
2) Check proper connection to passenger air bag (inflator)
module at terminals in "G65" connector.
3) If OK, then connect special tools (A), (B) and (D) to
"G65" connector.
Special tool
(A): 09932–76010
(B): 09932–75010
(D): 09932–78310
(D)
(B)
4) Check SDM DTC.
With ignition switch ON, is DTC B1041 indicated?
2 1) With ignition switch OFF, disconnect "G67" connector
located near the glove box.
2) Check proper connection to instrument panel harness
connector at terminal "G67-1" and "G67-2".
3) If OK, then connect special tools (B) and (C) to "G67"
connector disconnected in Step 1).
Special tool
(B): 09932–75010
(C): 09932–77320
(C)
DRIVER
(B)
4) Check SDM DTC.
With ignition switch ON, is DTC B1041 indicated?
Action
(A)
"G65"
STEERING WHEEL
I5JB0A820033-01
"G67"
PASSENGER
STEERING WHEEL
I5JB0A820034-01
Yes
Go to Step 2.
Go to Step 3.
No
Turn ignition switch
OFF. Replace
passenger air bag
(inflator) module
referring to "Passenger
Air Bag (Inflator) Module
Removal and
Installation: ".
High resistance or open
wire "BLU/RED" or
"YEL/RED" circuit.
(Between "G68" and
"G65" connectors)