7B-81 Air Conditioning System:
Thermal Switch Removal and Installation for
M16 Engine Model
Removal
1) Disconnect negative (–) cable from battery.
2) Disconnect thermal switch connectors.
3) Remove thermal switch (1) from compressor
assembly (2) using flat head (3).
3
Installation
Reverse removal procedure noting the following.
• Clean installation part of compressor body (3) and
thermal switch (1).
• Apply silicon (2) to thermal switch (1). Use specified
silicon in thermal switch kit.
Relief Valve On-Vehicle Inspection for M16
Engine Model
Using special tool, check is there is refrigerant leakage.
If there is refrigerant leakage, replace relief valve (1).
Special tool
(A) : 09990–86011
(A)
S5JB0A7206066
1
2
I5JB0A720080-01
1
2
3
I5JB0A720081-02
S5JB0A7206067
1
I5JB0A720082-02
Relief Valve On-Vehicle Inspection For J20
Engine Model
Using special tool (A), check is there is refrigerant
leakage.
If there is refrigerant leakage, replace compressor body.
Special tool
(A): 09990–86011
Relief Valve Removal and Installation for M16
Engine Model
Removal
1) Removal compressor from vehicle. Referring to
"Compressor Assembly Removal and Installation for
M16 Engine Model: ".
2) Remove relief valve (1) and O-ring from compressor
body (2).
S5JB0A7206068
(A)
I5JB0A720083-01
S5JB0A7206069
1
2
I5JB0A720084-01