Diagnostic Information And Procedures; Rear End Door Window Defogger Symptom Diagnosis - Suzuki GRAND VITARA Owner's Manual

9E-3 Glass / Windows / Mirrors:
Use the specific adhesive which has the following property.
Glass adhesive shearing strength
40 kg/cm 2 (569 lb/in 2 ) or more
Adhesive materials and tools required for removal and installation.
• One component urethane adhesive and primers used in combination (For one sheet of rear quarter window).
– Adhesive (470 g (15.7 oz.))
– Primer for glass (30 g (1.0 oz.))
– Primer for body (30 g (1.0 oz.))
– Primer for molding (30 g (1.0 oz.))
• Eyeleteer
• Piano string
• Windshield knife
• Brush for primer application (2 pcs)
• Knife
• Rubber sucker grip
• Sealant gun (for filling adhesive)
• Putty spatula (for correcting adhered parts)

Rear End door Window Defogger Symptom Diagnosis

NOTE
• Use of SUZUKI scan tool makes it easy to check whether a faulty condition is on the input side or
output side of BCM. For checking procedure, refer to "Diagnosis Using Output Test Function of
SUZUKI Scan Tool" under "Scan Tool Data: in Section 10B".
• Check each part in the order from the top of the following list.
Condition
Rear end door window
defogger does not
operate

Diagnostic Information and Procedures

Possible cause
Circuit fuse blown
Rear end door window defogger relay
faulty
Defogger wire faulty
Wiring or grounding faulty
HVAC control module faulty
BCM faulty
Correction / Reference Item
Replace fuse and check for short circuit.
Check rear end door window defogger relay
referring to "Rear End Door Window Defogger
Relay Inspection: ".
Check defogger wire referring to "Rear End
Door Window Defogger Wire Inspection: ".
Repair circuit.
Check HVAC control module referring to
"HVAC Control Module and Its Circuits
Inspection: in Section 7B".
Replace after making sure that none of above
parts is faulty.
S5JB0A9504001