Suzuki GRAND VITARA Owner's Manual page 1186

7B-77 Air Conditioning System:
Magnet Clutch Removal and Installation for M16
Engine Model
Removal
1) Remove compressor from vehicle. Refer to
"Compressor Assembly Removal and Installation for
M16 Engine Model: ".
2) Fix armature plate (1) with special tool (A) and
remove armature plate bolt (2).
Special tool
(A): 09991–06310
NOTE
Do not reuse armature plate bolt.
1
3) Remove armature plate.
4) Remove shims from shaft.
5) Using special tool (A), remove circlip (1).
Special tool
(A): 09900–06107
(A)
1
S5JB0A7206048
2
(A)
I5JB0A720064-02
I5JB0A720065-01
6) Remove magnet clutch lead wire clamp screw, and
remove magnet clutch read wire ground terminal.
7) Remove magnet clutch pulley with puller (1).
NOTE
Be careful not to damage pulley when
tapping magnet clutch.
2. Compressor
8) Remove magnet clutch bolts, and then remove
magnet clutch coil.
NOTE
Do not reuse magnet clutch bolts.
Installation
1) Install magnet clutch coil (2), and then tighten new
magnet clutch coil bolts (1) as specified torque.
Tightening torque
Magnet clutch coil bolt (a): 4.9 N·m (0.49 kgf-m,
4.0 lb-ft)
2
1, (a)
2) Install clamp portion and ground terminal of lead
wire.
1
2
I5JB0A720066-01
I5JB0A720067-02