Sliding (Sun) Roof Assembly Disassembly And Reassembly - Suzuki GRAND VITARA Owner's Manual

Sliding (Sun) Roof Assembly Disassembly and
Reassembly
Disassembly
1) Remove sliding roof motor (1).
2) Slide sunshade (1) to full-position.
3) Remove deflector (2) from holder (3) with holding
deflector.
3
4) Remove No.1 peaces (1) and then pull out sunshade
(2) from guide rails (3).
5) Remove rail stoppers (4) from guide rails.
2
S5JB0A9906010
1
I5JB0A990014-01
1
2
I5JB0A990015-01
3
4
1
I5JB0A990016-01
Sun Roof / T-Top / Convertible Top:
6) Pull out drip channel (1), panel brackets (2), shoes
(3) and drive cables (4) all together from guide rails.
1
3
7) Disassemble drip channel, panel brackets, shoes
and drive cables.
8) Remove guide block (1) and housing covers (2) from
rails.
2
Reassembly
Reverse disassembly procedure for reassembly, noting
the following.
• Check wear and damage of drive cables and sliding
roof motor gear.
• Apply grease to sliding part.
• Slide shoes (1) to contact guide blocks (2) for
positioning the sliding roof to tilt up position and install
sliding roof motor.
1
2
4
I5JB0A990017-01
1
I5JB0A990018-01
2
I5JB0A990019-01
9I-6