Suzuki GRAND VITARA Owner's Manual page 767

1. Front oil seal No.1
: Apply grease 99000-25010 to oil seal lip.
2. Front case bolt
3. Front case
4. Knock pin
5. Oil pipe
6. Input gear assembly
7. Center case
: Apply sealant 99000-31260 to mating
surface of front case, differential lock shift
lever case and center case.
8. Differential lock shift lever case
9. Needle bearing
10. Snap ring
11. Washer
12. Shim
13. Reduction shift sleeve
14. Center differential assembly
15. Front drive shaft
16. Thrust bearing
Transfer: Non-Shift Type (Transfer without Shift Actuator) 3C-79
17. Differential lock clutch sleeve
18. Front drive sprocket bush
19. Front drive sprocket
20. Rear output shaft assembly
21. Front output shaft assembly
22. Drive chain
23. Rear case
: Apply sealant 99000-31260 to mating
surface of transfer rear case, oil pump
cover and transfer center case.
24. Oil level / filler plug
: Apply sealant 99000-31260 to plug
thread.
25. Rear case bolt
26. Oil strainer
27. Oil strainer bolt
28. Oil pump outer rotor
29. Oil pump inner rotor
30. Oil pump drive pin
31. Oil pump cover
32. Oil pump cover bolt
33. Oil drain plug
: Apply sealant 99000-31260 to
plug thread.
34. Transfer to transmission bolt
35. Front oil seal No.2
: Apply grease 99000-25010 to
oil seal lip.
36. Rear oil seal
: Apply grease 99000-25010 to
oil seal lip.
37. Damper
38. Damper bolt
39. Shift case
40. Shift lever case bolt
41. O-ring
: 23 N⋅m (2.3 kgf-m, 17.0 lb-ft)
: 10 N⋅m (1.0 kgf-m, 7.5 lb-ft)
: 50 N⋅m (5.0 kgf-m, 36.5 lb-ft)
: Do not reuse.
: Apply transfer oil.