Chrysler 1998 Viper RT/10 Owner's Manual page 834

22 - 1 2 TIRES AND WHEELS S R
8ERW1CE P R O C E D U R E S (Continued)
W H E E L
W H E E L
O U T E R - F A C E
C L I P - O N
W H E E L
W E I G H T
W H E E L
I N N E R
FACE
For static imbalance, find the location of the heavy
spot causing the imbalance. Counter balance the
wheel and tire directly opposite the heavy spot.
Determine weight required to counterbalance the
area of imbalance. Place h a l f of this weight on the
i n n e r r i m flange and the other h a l f on the r i m
between the outer face and the weld using tape on
wheel weights.(Fig. 9) and (Fig. 10). Off-vehicle bal-
ancing is necessary.
Wheel balancing can be accomplished w i t h either
on or off vehicle equipment. When using on-vehicle
balancing equipment, remove the opposite wheel/tire.
80ab370d
Fig. 8 Wheel Weight Locations
ADD BALANCE
WEIGHTS HERE
TIRE OR WHEEL TRAMP,
OR WHEEL HOP
Fig. 9 Static Unbalance & Balance
CORRECTIVE
WEIGHT
LOCATION
ADD BALANCE
WEIGHTS HERE
J8922-8
HEAVY SPOT
WHEEL SHIMMY
AND VIBRATION
CORRECTIVE WEIGHT
LOCATION
J8922-9
Fig. 10 Dynamic Unbalance & Balance