Evap Canister - Chrysler 1998 Viper RT/10 Owner's Manual

SR
EMISSION CONTROL SYSTEMS 25 - 1 3
R E M O V A L A N D I N S T A L L A T I O N
DUTY CYCLE EVAP PURGE SOLENOID
The EVAP purge solenoid mounts to the radiator
support behind the front fascia.
EEMOVAL
(1) Remove the front fascia. Refer to Group 13.
(2) Disconnect vacuum harness and electrical con-
nector from solenoid.
(3) Remove EVAP purge solenoid from rubber
mounting. Remove solenoid.
I N S T A L L A T I O N
(1) Connect vacuum harness and electrical connec-
tor to solenoid.
(2) I n s t a l l solenoid into the rubber mounting.
(3) I n s t a l l front fascia. Refer to Group 13.
EVAP CANISTER
The EVAP purge canister mounts to the radiator
support behind the front fascia.
Fig 4 EVAP and LDP Pump
R E M O V A L
(1) Remove the front fascia. Refer to Group 13.
(2) Disconnect vacuum harness and electrical con-
nector.
(3) F r o m inside of the left front wheel well, remove
EVAP purge canister and L D P P u m p bracket mount-
i n g bolts (Fig. 5).
Fig. 5 EVAP and LDP Mounting Bolts
(4) Remove hoses from the top of EVAP canister.
(5) Remove 3 nuts from EVAP canister and bracket
(Fig. 6).
Fig. 6 EVAP Canister Mounting Nuts