Chrysler 1998 Viper RT/10 Owner's Manual page 303

S R
IGNITION SYSTEM 8D - 1 7
R E M O V A L A N D I N S T A L L A T I O N ( C o n t i n u e d )
(c) W i t h key cylinder i n unseated position, rotate
key counterclockwise to the lock position a n d
remove key.
(d) Remove key cylinder from ignition switch
(Fig. 46).
958D-63
Fig. 44 Key Cylinder Retaining Screw
I N S T A L L A T I O N
(1) Connect electrical connectors to ignition switch.
Make sure t h a t switch locking tabs are fully seated
i n w i r i n g connectors.
(2) The p a r k lock dowel p i n and column lock flag
must also be properly indexed before installing
switch (Fig. 47).
L ^ RING 908D-16
Fig. 45 Unseated Key Cylinder
908D-18
Fig. 47 Ignition Switch View From Column