Chrysler 1998 Viper RT/10 Owner's Manual page 810

21 - 8
TRANSMISSION
S R
DISASSEMBLY AND ASSEMBLY (Continued)
(8) Eemove speed sensor tone wheel and snap
rings (Fig. 19).
SNAP RINGS
M A I N
SHAFT
9321-61
Fig. 19 Tone Wheel Removal
(9) Remove main shaft roller bearing snap ring,
roller bearing and spacers (Fig. 20).
REVERSE
GEAR
SPACERS
BEARING
MAIN
SHAFT
9321-62
Fig. 20 Bearing and Spacer Removal
(10) Remove reverse gear snap ring and thrust
washer (Fig. 21).
(11) Remove reverse gear, bearing, wave washer
and brass synchronizer ring (Fig. 22).
(12) Under normal use the reverse synchronizer is
forced against the snap ring. This makes snap ring
removal difficult. Lightly tap the reverse synchro-
nizer forward to relieve pressure on snap ring. (Fig.
23). This will make it easier to remove the snap ring.
• REVERSE GEAR I THRUST
* WASHER
SNAP RING
PLIERS
9321-63
Fig. 21 Reverse Gear Snap Ring and Thrust Washer
REVERSE
GEAR *
MAIN
SHAFT
BEARING 9321-64
Fig. 22 Reverse Gear, Bearing and Synchronizer
PUNCH HAMMER
REVERSE
SYNCHRONIZER
M A i N
SHAFT 9321-65
Fig. 23 Tap Reverse Synchronizer Forward