Headlamp Switch Replacement - Chrysler 1998 Viper RT/10 Owner's Manual

8U • 4
CHIME/BUZZER WARNING SYSTEM
SR
R E M O W A L A N D I N S T A L L A T I O N
CHIME MODULE
R E M O V A L
(1) Remove knee blocker attaching screws.
(2) Remove knee blocker.
(3) Remove the steel plate assembly m o u n t i n g
screws.
(4) Remove the steel reinforcement plate.
(5) Remove m o u n t i n g screws from chime module
(Fig.
4).
(6) Disconnect chime module w i r i n g and remove
module.
I N S T A L L A T I O N
For installation reverse the above procedures.
HEADLAMP SWITCH REPLACEMENT
Refer to Group 8 E , I n s t r u m e n t Panel and Systems
for Removal and Installation procedures..
Fig. 4 Chime Module Location
SEAT BELT BUCKLE REPLACEMENT
Refer to Group 2 3 , Body for Removal and Installa-
tion procedures.