Lamp S E R V I C E; Headlamp Module - Chrysler 1998 Viper RT/10 Owner's Manual

Table of Contents

Advertisement

8L - 1 2
LAMPS
S R
LAMP S E R V I C E
INDEX
p a g e
R E M O V A L A N D I N S T A L L A T I O N
C E N T E R H I G H M O U N T E D S T O P L A M P
( C H M S L )
1 3
F O G L A M P
12
F O G L A M P C O V E R
13
R E M O V A L A N D I N S T A L L A T I O N
HEADLAMP MODULE
The headlamp module contains the p a r k / t u r n sig-
nal, low and high-beam lamps. When a headlamp
module is replaced, the headlamp alignment must be
adjusted. Refer to headlamp alignment procedures of
this section.
R E M O V A L
(1) Remove front bumper fascia as necessary to
gain access to bottom of headlamp. Refer to Group
13, Bumper and Frame, for proper procedures.
(2) Remove nuts holding headlamp to radiator sup-
port panel (Fig. 1).
(3) Remove n u t holding headlamp to front frame
r a i l bracket.
(4) Disengage wire connector from back of head-
lamp.
(5) Separate headlamp from vehicle.
Fig.
1 Headlamp
Module
INSTALLATION
(1) Position headlamp to vehicle.
(2) Engage w i r e connector to back of headlamp.
(3) I n s t a l l n u t holding headlamp to front frame
r a i l bracket.
page
F R O N T S I D E M A R K E R L A M P
13
H E A D L A M P M O D U L E
12
L I C E N S E P L A T E L A M P
15
T A I L A N D S T O P L A M P
14
T U R N S I G N A L A N D B A C K - U P L A M P
14
(4) I n s t a l l nuts holding headlamp to radiator sup-
port panel.
. (5) I n s t a l l front bumper fascia as necessary. Refer
to Group 13, Bumper and Frame, for proper proce-
dures.
FOG LAMP
REMOVAL
(1) Remove fog lamp cover.
(2) Remove front splash shield to gain access to
the back of fog lamp. Refer to Group 13, Bumper and
Frame, for proper procedures.(Fig. 2).
(3) Disengage fog lamp connector.
(4) Remove bolts attaching fog lamp to
front
bumper fascia
(5) Remove fog lamp from fascia.
Fig. 2 Fog
Lamp
INSTALLATION
(1) I n s t a l l fog lamp to fascia.
(2) I n s t a l l bolt attaching fog lamp to front bumper
fascia.
(3) Connect fog lamp connector.
(4) Install front splash shield.
(5) I n s t a l l fog lamp cover.

Advertisement

Table of Contents
loading

Table of Contents