Rear Speakers - Chrysler 1998 Viper RT/10 Owner's Manual

S R
AUDIO SYSTEMS 8F - 5
R E M O V A L A N D I N S T A L L A T I O N ( C o n t i n u e d )
FRONT MID-RANGE SPEAKER
R E M O V A L
(1) Remove speaker grille by gently p u l l i n g grille
from speaker (Fig. 6).
(2) Remove the attaching screws t h a t retain the
speaker to the inner door.
(3) Disconnect the w i r i n g connector and remove
speaker.
INSTALLATION
For installation, reverse the above procedures.
Fig. 6 Front Mid-range Speaker
FRONT TWEETER SPEAKER
REMOVAL
(1) Remove door t r i m panel and disconnect w i r e
connectors (Fig. 7).
(2) Remove the two screws that r e t a i n the speaker
to the door t r i m panel.
(3) Disconnect the w i r i n g connector and remove
the speaker.
INSTALLATION
For installation, reverse the above procedures.
Fig. 7 Front Tweeter Speaker
RADIO
R E M O V A L
(1) Remove instrument panel center bezel and dis-
connect the cigar lighter and fog lamp switches w i r e
connectors (Fig. 8).
Fig. 8 Center Bezel
(2) Remove r i g h t and left side knee bolster (Fig. 9 ) .
(3) Remove headlamp switch knob, by inserting a
paper clip i n the hole under the knob, and pushing
gently to release the lock clip.
(4) Remove the t i l t wheel handle.
(5) Remove instrument panel bezel.
(6) Remove two radio m o u n t i n g screws.
(7) Remove radio and disconnect wire connector,
coaxial cables and antenna cable (Fig. 10).
W A R N I N G : T h e locator p l u g o n rear of radio m u s t
b e i n s e r t e d into h o l e in i n s t r u m e n t p a n e l for c o r r e c t
installation.
INSTALLATION
For installation reverse the above procedures.
REAR SPEAKERS
C O U P E
REMOVAL
(1) R e m o v e t h e c a r g o a r e a l i n e r as n e c e s s a r y ( F i g .
11).
(2) R e m o v e s p e a k e r a t t a c h i n g s c r e w s .