Fog Lamp Unit Standard Procedure Standard Procedure - Fog Lamp Unit Alignment; Standard Procedure - Fog Lamp Unit Alignment - Export - Chrysler Dodge Caravan 2002 Manual

8L - 10 LAMPS/LIGHTING - EXTERIOR
FOG LAMP UNIT
STANDARD PROCEDURE
STANDARD PROCEDURE - FOG LAMP UNIT
ALIGNMENT
FOG LAMP UNIT ALIGNMENT
Prepare an alignment screen (Refer to 8 - ELEC-
TRICAL/LAMPS/LIGHTING
LAMP UNIT - STANDARD
properly aligned fog lamp will project a pattern on
the alignment screen 100 mm (4 in.) below the fog
lamp center line and straight ahead (Fig. 9). To
improve visual interpretation of the fog lamp pattern
1 - HIGH INTENSITY AREA
2 - CENTER OF VEHICLE
3 - HORIZONTAL CENTER OF FOG LAMP
- EXTERIOR/HEAD-
PROCEDURE). A
Fig. 9 FOG LAMP UNIT ALIGNMENT
on the alignment screen, the headlamps should be in
the "off" position.
The fog lamps are adjusted by a adjustment screw
located through the lens on Dodge vehicles, and by a
knob on the back of the lamp.
STANDARD PROCEDURE - FOG LAMP UNIT
ALIGNMENT - EXPORT
Prepare an alignment screen (Refer to 8 - ELEC-
TRICAL/LAMPS/LIGHTING
LAMP UNIT - STANDARD
properly aligned fog lamp will project a pattern on
the alignment screen 200 mm (8 in.) below the fog
lamp center line and straight ahead (Fig. 10). To
improve visual interpretation of the fog lamp pattern
on the alignment screen, the headlamps should be in
the "off" position.
4 - 100MM (4 IN.)
5 - 7.62 METERS (25 FT.)
6 - FRONT OF FOG LAMP
RS
- EXTERIOR/HEAD-
PROCEDURE). A