Firmware Upgrade & Backup
Firmware Upgrade from HTTP
This window is used to initiate a firmware upgrade from a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Upgrade from
HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source File
Destination
Click the Upgrade button to initiate the firmware upgrade.
Firmware Upgrade from TFTP
This window is used to initiate a firmware upgrade from a TFTP server.
To view the following window, click Tools > Firmware Upgrade & Backup > firmware Upgrade from
TFTP, as shown below:
The fields that can be configured are described below:
Parameter
TFTP Server IP
Source File
Destination File
Click the Upgrade button to initiate the firmware upgrade.
DIS-200G Series Industrial Gigabit Ethernet Smart Managed Switch
Figure 3-3 Firmware Upgrade from HTTP window
Description
Click the Browse button to navigate to the location of the firmware
file located on the local PC.
The destination Image ID is automatically assigned to new
upgrade firmware by system.
Figure 3-4 Firmware Upgrade from TFTP window
Description
Enter the TFTP server's IPv4 address here.
Enter the source filename and path of the firmware file located on
the TFTP server here. This field can be up to 64 characters long.
The destination Image ID is automatically assigned to new
upgrade firmware by system.
12